A-Designs Ventura


Purchase this product now and earn 2,799 Points!
SKU ADE-VENTURA Categories , , Tag

A Designs Ventura Channel Strip

The A Designs Ventura Channel Strip is a new design inspired by the great Quad Eight consoles. Run at optimal levels, its’ signal is clear and ultra transparent, with all the dimensionality, air, and extended bass you expect from high-quality analog. Push it a little harder and the Ventura’s custom-wound, ear-tested transformer responds with a more aggressive sound while still retaining the utmost clarity. To add its own special mojo, it features a 3-band EQ reminiscent of console EQs from the golden age of recording. And even if you’re one of those engineers who religiously avoid using equalization while tracking, you’ll find yourself looking for excuses to use this EQ—especially if you need midrange punch without harshness on guitars or snare. Plus, the A Designs Ventura Channel Strip’s EQ can be accessed via its own insert for sweetening tracks during mixdown. The A Designs Ventura Channel Strip also has a high-impedance instrument DI built to enhance the performance guitar and bass pickups.

The C12X Discrete Transistor Op Amp

The heart of the Ventura and source of its ultra transparent audio is the C12X, a discrete transistor operational amplifier designed by Carl Johnson. Operating on +/-30VDC rails, the C12X is a high-gain, fast-slew, stable audio block with virtually no DC offset over the audio spectrum. Plus, it’s capable of driving a 50-ohm load at 50Hz with very little current draw. It’s used in the microphone preamp, instrument input amp, and main output/EQ output stages. The mic preamp itself is a single-stage, transformer-coupled design with balanced I/O. It includes phase reverse, -20 dB pad, +48V phantom power with LED indicator, and conductive plastic gain control pot. The preamp section feeds both the EQ section and a preamp output mult simultaneously.

True Three-Band Parametric EQ

The A Designs Ventura Channel Strip’s three-band parametric equalizer is also a unique design featuring 33 frequencies with three bands of overlapping ranges from 50Hz to 15KHz. Both the frequency selection and the +/-12 dB boost/cut controls are stepped for precise, repeatable settings. Each band has a Q switch with three fixed positions: Sharp, Wide, and Narrow. The low and high bands are peak/dip, but flipping the shelf switch changes their characteristic to shelf type. The shelving switch disables the Q feature on high and low bands only. When in the up position, the high/low filters insert the fixed 12dB/octave high- and low-cut filters, which work whether the EQ is in or out. And finally, the equalizer’s input/insert return provides direct input to the EQ, bypassing both the mic pre and instrument input.

Guitar/Bass Pickup-Friendly D.I.

Separate from the mic pre, the instrument DI is a single-stage, single-ended, high-impedance preamp that also benefits from the C12X. Designed specifically to counteract the negative effects of guitar/bass-pickup loading, it includes a front-panel 1/4″ jack and gain pot. This section also feeds the EQ and preamp output mult simultaneously. Combining transparency and sonic versatility with the ability to use its three sections independently, the A-Designs Audio Ventura gives you a “desert island” preamp that will serve any and all recording applications: studio or live sound, rock band or orchestral ensemble.

A Designs Ventura Channel Strip Features:

  • Ultra transparent, solid-state mic preamplifier with 72db gain; instrument DI; and true, 3-band parametric EQ with high-and low-pass filters • Mic preamp, EQ, and DI can be used together or independently • Three specially designed discrete C12X operational amplifiers • Jensen input transformer and custom Cinemag output transformers • Toroidal power transformer • Balanced TRS insert return/EQ input • Separate gain controls for mic and instrument inputs • -20dB pad, +48VDC phantom power with red LED indicator, phase switch, and on/off switch with blue LED indicator • Balanced gold Neutrik XLR input, direct, and main output connectors • Silver-contact, high-durability toggle switches with no relays • Hand-built in the USA with audiophile-quality components including high-tolerance metal film resistors and high-quality polystyrene, polypropylene, COG, and bi-polar capacitors • Single rackspace steel chassis

A Designs Ventura Channel Strip Specifications:

  • Frequency Response: Better than 20Hz – 20kHz • Gain Range: Microphone: -62dBV to +30dBV, Instrument: 70dB, Insert/EQ Input: 0dBV to +26dBV • Input Impedance:  Microphone: 1.4k ohm typical, Instrument: 20M ohm nominal, Insert/EQ Input: 15k ohm • Noise (EIN): -120dBm • Phantom Power: +48VDC • Balanced XLR outputs: 600 ohm nominal • Distortion: 0.01% • Power Requirements 120/230VAC – 23W • Dimensions: 19″ x 1-3/4″ x 10″ (W-H-D) • Weight: 14 lb. • Shipping weight: 16.5 lb.

Click here to visit the A Designs website

You May Also Like...

Shopping Cart
Scroll to Top