Focusrite RedNet HD32R – 32×32 Pro Tools HD Dante I/O Interface with Redundant Network & Power

OVERVIEW

The RedNet HD32R is a 1U, 19in rack-mount Dante interface that allows Pro Tools|HD users direct access to the full benefits of the Dante digital audio networking system, including its uniquely flexible network topology and premium quality audio interfaces. The Pro Tools system is connected to the HD32R via standard Mini DigiLink ports.

Dual Ethernet ports with locking EtherCON connectors are provided, with several operating modes including daisy-chaining and redundancy confirmed by front-panel indicators. Two separate power supplies with fault detection capability are included, with separate power input sockets (with retaining clips) on the rear of the unit. Power state is indicated both remotely and on the front panel. The HD32R features a rugged, roadworthy exterior and high internal build quality. In addition, it offers a compact 1U rack-mount form factor for a full 32 channels of I/O.

HD32R acts as a 64-channel (32 in/32 out) digital break-in/out box, operating in the same way as a standard interface, and supporting a wide range of Pro Tools|HDX and HD cards. Supported Pro Tools systems include Pro Tools|HDX, Pro Tools|HD Native, Pro Tools|HD Native Thunderbolt, and Pro Tools|HD TDM. Up to six HD32R modules can be used with a Pro Tools|HDX system and three with Pro Tools|HD, allowing the maximum channel count for either. Simply connect the HD32R to Pro Tools|HD with standard Mini DigiLink connectors.

HD32R allows the use of the low-latency performance of Pro Tools|HD cards, bringing the full benefits of Dante audio-over-IP networking and the RedNet product range to a Pro Tools|HD system. The entire range of Dante-compatible products, including the superb RedNet analogue and digital interfaces, can then be used with a Pro Tools|HD system, all connected via Ethernet cable.

From complex multi-room systems to single installations, Dante and RedNet offer the ability to create a sophisticated and comprehensive high-quality audio production environment around a standard Ethernet network, with HD32R providing the bridge to any Pro Tools|HD system. Assign any available Dante source or destination via HD32R, and it appears in Pro Tools exactly as it would with any other Pro Tools-compatible interface, maintaining traditional Pro Tools workflows.

KEY HIGHLIGHTS

32×32 Pro Tools | HD I/O with Dual PSUs

RedNet HD32R is a 1U, Pro Tools | HD™ interface for any Dante™ audio-over-IP network, providing up to 32×32 channels of I/O (16×16 at 192kHz) Featuring network and power supply redundancy, RedNet HD32R is the ideal choice for integrating your Pro Tools HD system into a Dante networked I/O environment in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.

A pair of DigiLink mini connectors allows RedNet HD32R to connect directly to any Pro Tools | HD system, whether it’s Native, HDX or even a legacy TDM system. Multiple RedNet HD32R units can be on the same Pro Tools system up to the maximum I/O channel count of Pro Tools, and Loop Sync I/O allows seamless integration with other Pro Tools interfaces such as HD I/O and Sync HD I/O.

Brainworx bx_console

The Focusrite Studio Console reborn in your DAW

The Focusrite Studio Console defined countless hits of the 80s and 90s, thanks in large part to its ISA 110 Equaliser and ISA 130 Dynamics Modules. Brainworx’s bx_console Focusrite plug-in brings you stunningly accurate emulations of both in a single plug-in, perfectly capturing the famously warm, open sound of two of the most revered pieces of studio hardware ever made.

Enjoy 3 Years of Warranty

All Focusrite products are built to the highest standards and are designed to provide many years of reliable performance.

FEATURES

• Allows Dante Ethernet-based audio networking products to interoperate fully with Pro Tools|HD & Pro Tools|HDX.
• Ethernet and power supply redundancy with auto switchover in case of failure and locking connectors.
• Provides the vital link to create an extensive, high-quality audio network based on standard Cat 5e or Cat 6 wiring, bringing the latest advances in digital audio networking to Pro Tools|HD.
• Cost-effectively increase audio I/O quality and flexibility with RedNet interfaces.
• Permits multiple workstations to access the same interface hardware and I/O.
• No changes to Pro Tools workflow required — simple, logical assignment of RedNet I/O to Pro Tools|HD inputs and outputs.
• Up to 32 I/O with Pro Tools|HD over a single DigiLink connection per RedNet HD32R.
• Additional Avid/Digidesign interfaces may be connected to expansion ports.
• Upgrade to RedNet interfaces while remaining fully compatible with TDM- or AAX-DSP-based plugins and saved sessions.

TECHNICAL SPECS

Digital Performance

Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit

Clock Sources: Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master

External Word Clock Range: Nominal sample rate ±7.5

Channel Count: 32×32 at up to 96kHz sampling rate, 16×16 at 176.4 and 192kHz

Rear Panel Connectivity

Primary Port: 1 x Mini DigiLink

Expansion Port: 1 x Mini DigiLink

Word Clock Input: 1 x BNC 75O port (switchable termination)

Word Clock Output: 1 x BNC 75O port

PSU: 2 x IEC Inputs with retaining clips

Network: 2 x etherCON NE8FBH-S, also compatible with standard RJ45 connectors

Network Modes

Redundant: Allows a unit to connect two independent networks

Switched: Connects both ports to an integrated network switch, allowing daisy-chaining of devices