BRING YOUR RECORD COLLECTION TO LIFE

Regardless of whether you are listening to pristine classical recordings or the heaviest rock, getting the most out of your turntable system can be a challenge. The Precision Phono Pre-Amplifier is designed to coax out every detail from your pressings and turntable and provide your amplifiers with a complete and unadulterated signal, so you get the most from your vinyl collection.

Both the moving magnet and moving coil gain settings have been optimized to enhance the performance of the cartridge. These Phono stages use carefully-implemented discrete Class-A designs that utilize the highest performance JFETs and BJTs, honed over countless hours of listening and comparison.

The resulting sound quality is technically – and musically – exceptional. The RIAA curve is matched to better than 0.15dB, and frequency response from 20Hz to 20kHz is better than +/-0.1dB. Even at 10Hz and 120kHz, there is less than a single decibel of deviation. Dynamic range is a powerful 101.58dB (MM path), and EIN is an exceptionally low -129dBV (MC path).

Beyond its technical feats however, it is the immersive listening experience that sets the Precision Phono Pre-Amplifier apart. The soundstage brings out a stunning three-dimensionality from recordings with a combination of a rich low end, pristine clarity throughout the crucial midrange, and a delicately sweet high-end. These are hallmarks of Rupert Neve’s vintage and modern recording equipment, and are exemplified in the Precision Series.

CONTROL YOUR TONE

While the Fidelice Precision Phono Pre-Amplifier has an intentionally minimal feature set, there are several options that can adapt the phono stage to your system.

The left-hand switch inserts an 18dB / octave Rumble Filter with a corner frequency at 11.4Hz to remove extremely low-frequency artifacts from the signal, saving your amplifiers and speakers from exerting extra energy in replicating unnecessary sounds below that frequency.

Both moving magnet (MM) and moving coil (MC) signal paths are included such that the Precision Phono Pre-Amplifier can be used with virtually any cartridge. The MM setting provides an input impedance of 47kOhms, selectable

capacitance at 110pF or 220pF to serve a variety of MM cartridges, and 40dB of gain. The MC setting provides an input impedance of 100 Ohms, capacitance of 220pF, and gain of 60dB.

With an elegant mahogany-accented aluminum chassis and sound quality revered by the entire recording industry for generations, the Precision Phono Pre-Amplifier brings true studio sound to your turntable system: always true to the source, but with the hint of magical musicality that only Rupert Neve’s equipment can deliver.

SPECIFICATIONS