Ex Machina Soundworks Pulsar Studio Monitors (pair)
Big sound, out of this world imaging, superb detail, wide sweet spot are among a few features that get you to your end result better and faster.
The smallest speaker in our family, Pulsar is an ideal choice for near to near-mid applications or as primary monitors in smaller rooms. Don’t let the size fool you though. It features the same acoustically inert Valchromat cabinets, cutting edge drivers, Hypex Ncore amps and ultra-advanced DSP correction as its larger siblings employ. Dead flat phase and magnitude linearity, an ultra-wide sweet spot and eerily realistic phantom center, vanishingly low distortion and superb transient response, clarity and detail all add up to give you non-fatiguing, effortless insight into your mix. Allowing you to make better decisions, faster, every time.
Cabinet: Our cabinets are made from a high performance wood composite called Valchromat. Its exceptional rigidity, density, and damping characteristics make our enclosures far more acoustically inert than standard MDF or plywood cabinets. In addition, the front and side panels use 30mm thick sheet stock, which allows us to apply a full 1” radius to the front baffle, dramatically reducing baffle diffraction artifacts. Finally, all our cabinets are sealed, which allows our proprietary correction algorithm to flatten both magnitude and phase response all the way to the bottom octaves. Coaxial: Our signature driver is our 6.5” coaxial mid/tweet. The tweeter is a 25mm, optimized dome made from Ora GrapheneQ, the first free-standing graphene oxide diaphragm ever deployed in a loudspeaker. This revolutionary material that defies traditional expectations, producing a diaphragm that is both stiff and well damped. GrapheneQ is not only as well damped as silk or paper, but also has a better stiffness to weight ratio than titanium. It remains a perfect piston past 30khz and exhibits a well controlled breakup beyond that. Exceptionally detailed yet effortlessly non-fatiguing, with a far wider sweet spot than an AMT or ribbon tweeter. The midrange is made from a similarly cutting edge material called Textreme, an extremely light and rigid thin-ply carbon fiber whose fiber orientation has been tuned to push the breakup of our cones over two octaves past our in-use passband. The geometry of the midrange makes it an optimal constant directivity waveguide for the tweeter. Combined with a unique underhung surround, this design gives our loudspeakers their exceptional off-axis performance. Subwoofer: A collaboration with SEAS, our 8” subwoofers are capable of 28mm of peak to peak linear, highly symmetrical excursion and double that before damage. This gives them a shocking amount of output and exceptionally low distortion in our sealed enclosures. A resonant frequency of 24hz, they can reach as deep as most 12-15” subs. And with massive 2” voice coils and titanium formers, they can happily take 250 watts of continuous power all day, every day. They are in fact, such perfect low frequency transducers that we don’t actually make bigger ones for our larger speakers. We just use more of them. Sometimes a lot more. Sealed Enclosure – The exceptional linear excursion performance of our drivers obviates the need for ports or transmission lines. This in turn eliminates the group delay, turbulence, and compression of these more typical cabinet alignments, allowing our DSP to fully linearize the phase all the way down to the low frequency extension limits of the driver itself. SpeakON Quick Change System – Pre-soldered SpeakON pigtail leads are fitted to all our drivers and the Neutrik NL4MP panel mount pass through maintains airtight, mechanically and electrically sound connection to the amplifier chamber while allowing for effortless field servicing.
Processing Modes – “Full” deploys our high precision, proprietary DSP linearization for both phase and magnitude response, at the expense of 40ms of latency. “Low Latency” deploys a more traditional IIR based correction for magnitude response only, but only introduces 3ms of latency. This can be useful for tracking applications. Boundary – By default the Pulsar is corrected for free space deployment. Half and Quarter space loading adjustments are available on the rear. IEC Inlet – Pulsar is auto-switching for both 110v and 220v input voltages. No adapter necessary. S/N and Calibration Tag – Each speaker is individually measured, calibrated and corrected by one of our senior engineers in house, and signed once it passes our stringent tolerance requirements. Consecutive serial numbers are not required for stereo or surround matching. DSP/Conversion – As our correction process is computationally demanding, each speaker is fitted with its own SHARC DSP and high performance conversion. Very low jitter reclocking, high performance analog circuitry, and AKM Velvet Sound conversion contribute to the sonic transparency of our DSP hardware and conversion stages. Amplification – The Hypex Ncore NC122MP and NC252MP modules provide everything you could ask for in an amplifier – vanishingly low distortion, superb efficiency, negligible output impedance, wide-band frequency response and phase/magnitude linearity and a healthy 450 total watts of output power per channel. https://youtu.be/ICboP7RcXq0
- Magnitude Linearity: +/- 1db 35hz – 30khz
- Phase Linearity: +/- 15° 50hz – 30khz
- Maximum Continuous SPL (per pair at 1m): 106db at 35hz, 113db 100hz – 30khz
- THD+N (94db at 1m): less than .5% 100hz – 30khz
- Directivity Index: 90° conical coherence
- 1”/25mm Ora GrapheneQ tweeter, coaxial arrangement with midrange
- 6.5”/176mm Textreme thin-ply woven carbon fiber midrange, underhung surround, FEA optimized tweeter waveguide
- 8”/221mm long throw aluminum alloy subwoofer
- Hypex Ncore – 250W RMS Subwoofer, 100W Midrange, 100W RMS Tweeter
- 200hz, 2khz
- 8th order, phase corrected
- 482 x 289 x 396 mm (19 x 11.4 x 15.6 inches)