Description

Tube-Tech MMC1A Compressor

Tube-Tech MMC1A Compressor makes wonders in recording or mixing difficult sources like very dynamic voices or instruments where the tonal caracter changes with level. MMC1A can deliver “automated” control where it normally takes loads of work to achieve perfect results.

Many singers have been “saved” by the MMC1A.
MMC1A also opens up new exiting creative possibillities in recording and mixing full range sources.

Technical description:

The MMC 1A encompasses a complete front-end, including an additional Direct Instrument input as well as a separate line input.
The microphone input has switchable loading impedance, phantom power, phase reversal and a –20 dB Pad. All inputs are equipped with a low-cut filter. The 3-band optical compressor is designed to maintain optimum summing of all three bands with a remarkably flat frequency response. A bypass switch shorts out the whole compressor.

Mic. Input/Output are balanced and have fully floating transformers with a static screen. The Line Input is unbalanced, but an optional transformer is available. The power supply and the sidechain circuits are based on a solid state circuit. With the exception of the output stage all DC voltages are stabilised.

Product Features

Mic. Gain in 2 dB and 10 dB steps
Selectable mic. impedance 600/1200/2400
Phantom Power (+48V)
Phase reversal
20 dB pad
High impedance Direct Input
Separate line input (gain +/- 10 dB)
Lowcut filter (20 Hz / 40 Hz/off)
Optical gain reduction elements
Cont. variable Threshold, Attack, Release
Ratio 2:1 to 10:1
LED display showing gain reduction
Low, Mid, High Output Gain: off to +10 dB
Variable X-over frequencies
Low noise < -80 dBu @ 0 dB gain
Master Output Gain: off to +10 dB