Speck Mic Pre 5.0

What is the MicPre 5.0?

The “MicPre 5.0” is a complete single channel microphone preamp that offers features and flexibility for use in the most serious recording applications. The signal path consists of a matched discrete transistor front-end, premium IC’s, and transformer output stage. With the push of a button, the MP5.0 can change from an “Transformer-Balanced” output to a “Active-Balanced” output.

The compact 1/2 rack format of the MP5.0 can easily be rack mounted and combined with the Speck Model ASC equalizer to create a highly functional outboard channel strip.

The MicPre 5.0 also includes a mix section that makes it perfect for DAW’s and remote recording.

Key Features

– Matched discrete transistor input / transformer output.
– 70 dB of preamp gain.
– Precision stepped gain control with variable trim control.
– Variable high pass filter.
– Mix output section with level, pan and mute.
– Mix section can be “linked” with additional MP5.0’s.
– Transformer “and” active balanced outputs.
– High resolution 10 segment LED VU meter.
– Internal power supply with toroidal transformer.
– All input, output, and insert connectors are balanced.
– Can be combined with the Model ASC EQ to form a Channel Strip.

What is Mix Node?

The mix section of the MicPre 5.0 provides a separate left/right mix out with level, pan and mute.

With only a simple interface cable, this mix section, or “Mix Node” can be linked with any number of MP5.0’s to form a fully integrated mix section.

In many situations such as desktop or location recording, this expandable feature of the MP5.0 can eliminate the need for a separate audio mixer.

Flexible signal routing

The MP5.0 is more than a mic pre. It gives you a surprising number of signal routing alternatives. Just use your imagination when plugging up the MP5.0.

Since the MP5.0 works with balanced or unbalanced gear, you will not be stuck looking for the proper cable or worrying about level compatibility between dissimilar gear.

Specifications

Gain Range (Mic)

70 dB total +10 to +60dB in 5dB steps -10/+10 variable trim Gain Range (D.I.)

-20 to +40 dB in 5 dB steps THD+N (Gain +40, Output +12dBu) 002% nominal

Noise EIN (22Hz-22kHz) -126 dBu (150 ohm, 60dB gain)

Freqency Response 10Hz-200kHz (+0/-3dB)

Mic input impedence(10Kz) 4.6k ohms

D.I. input impedence 50k ohms

Maximum input level +18dBu (without pad) +30dBu (with 20dB pad in)

Max. output level (10k load) +28dBu at active outputs +24dBu at transformer output

HP Filter 30Hz-250Hz (12dB/octave)

Phantom Power +48V regulated

Dimensions HxWxD=1.75″ x 8.5″ x 8.00″ (44mm x 216mm x 203mm)

Weight 5 Lbs. (2.27kg)

Power Requirements 100-120 VAC 50-60Hz 220-240 VAC 50-60Hz